Moser 1871 ChromStyle Pro clipper after 6 years

Moser 1871 ChromStyle Pro clipper after 6 years

Moser 1871 ChromStyle Pro clipper after 6 years

I went to a salon in the city center ... Idling Then it overgrown for several months. It was even possible to put up with a NiMh battery, but their knife is a consumable and it needs to be changed periodically (and this is for domestic use. ) In the warm season, I don’t care, but in the cold for me, an under-dried head = SARS. - brush I collected all these working machines and sold them on the classifieds site, and I started looking for an alternative for myself. Good day, Muska readers! - oil
Knives removed from the machine:
Machine: Voltage and internal resistance of a fully charged battery with a standard charger: Those. the battery has sat down, you will not finish the haircut with the wire, wait until the battery is charged in 16 hours (NiMh). The power supply is the charger. This machine is essentially the same, differing in the presence or absence of a titanium coating on the knife. The machine is low-voltage with a power adapter (at that time transformer) and a nozzle with a variable length. Having decided on the model, I decided to take ChromStyle Pro.
Next, I began to look into the professional segment. The “lubrication-free” knife is also pure marketing. Now I'll add an impression of Moser and its customer care. It may seem that the machine is expensive, but in fact it is cheaper to use it than Phillips! Plus, the comb ceases to be fixed and you have to hold it with your hand ... Philips never dreamed of such a quality haircut! All and at once no "antennas"! A wide knife grabs more. It turned out that the SC has ANY part from ANY typewriter in stock here and now! Plus they sharpen knives. Therefore, after a while, you have to lubricate the knife like on any other machine. In general, I began to look further. In general, I had to cut my hair to zero ... - instruction In general, I immediately thought of buying such a Philips locally (1.5 haircuts and it paid off). Board: Box:
- After the haircut, it is advisable to take a shower because hair is still frizzy. Board test. Of the top-end machines at that time, ChromStyle (on a NiCd battery) and the new version of ChromStyle Pro (on lithium), the rest of the machines are like two drops of water, the knives are compatible, the body is the same. Purchase: There is a completely opposite attitude. And in the middle of the 2000s, Philips released a clipper for self-clipping and began to advertise it. I clarify once again does she know what this haircut is and what it looks like? Yes, I know everything. The final was the same after 1.5 years. As a result, this Philips ~ $20 was bought. At first I liked Panasonic for.
The 1s3p battery is made using LiFePo4 technology from 14500 cans. It turned out to be convenient at the time.
In the nineties, I went to work in another city, after a while it was overgrown and I had to put everything in order. Saving time and money! Are they saving electricity? Today I will tell you about the purchase and operation of the Moser ChromStyle Pro hair clipper. The machine was bought on ebay in 2013 ~$200. Also in this machine there was one significant drawback. Further, Philips was bought again for $ 20 (the first one remained with the parents). But there are also punctures with such an algorithm. - power supply Next, I'm going to work in another city for several months. 1.JPG" /"> He takes the machine and goes to zero ... Power connector/contacts
Voltage at which the overdischarge protection is triggered: -car
To begin with, the story of how I came to do my own haircut with a clipper, and then to Moser products: This suits me. The machine cannot work from it.
Last year I bought a set of metal nozzles offline: Delivery in 2013 was long, but this was the case with all attempts from abroad.

Moser 1871 ChromStyle Pro clipper after 6 years


Of course, I was upset when I found the Moser SC in my city and called there ... It differed from the first only by a switching power supply. Therefore, almost always you have to ask to finish drying and sometimes more than once. Over time, both machines began to break the teeth on the combs. Philips just spits on the client something broke / broke not our problems throw away the whole device and buy a new one or do whatever you want ... This is a little annoying, despite the fact that for this very drying they take extra money to the cost of a haircut.
Measured capacity after 6 years of operation:
Knife block has 5 positions from 0.7mm minimum to 3mm: Power supply: Further, the course of the knife becomes very tight and if nothing is done, the motor will simply burn out. In general, I appreciated this device and stopped going to the hairdresser.
Features: Everything turned out to be sad, either the nameless NoName for $10 or the Panasonic for $150 (which is three times higher than its regular price) and there are no more options! As a result, I bought this NoName powered by 220v and removable nozzles (by the way, the nozzles in this nameless creation are of the type like on Moser, and not retractable like on Philips).
The machine itself and the knives are made in Germany: Bought from a shop that sells these machines. If earlier a hairdresser and home in the shower, now a haircut in the bathroom and immediately in the shower. I took the same Philips but on a battery. And then the master says yes, I’ll do everything for such and such a price. - 4 plastic nozzles: 3, 6,9 and 12 mm (three left) This is the company's policy! Now the price has become a little lower, which pleases. In general, I was angry this time at Phillips! And not even on its cheap design, but on the inherent rapid aging and the complete absence of parts.
Plastic nozzles from the kit: To which he told me that I would need to sharpen the knife in so many years At the moment, this machine is used by 1 adult and two children, i.e. haircuts only with this machine Knife thinks to get blunt!
The capacity of one can is 600mAh, the battery capacity is 1800mAh -charging glass As it turned out there cars
they work in hairdressing salons for wear and tear, and once in a couple of years of such operation it is necessary to sharpen a knife ... As a result, two fully working machines lay dead weight. And then household Moser Hungarian assembly with a small knife and a NiMh battery. < br /> I used to go to the hairdresser like most people. I wanted the “Platform” haircut that was then fashionable, then literally a few per city were taken for it. But basically the masters are normal. I talked with the master and told me what amount of work I do with a typewriter ...
If the batteries are completely dead or not working, the machine can be operated from this power supply! Philips can't do that. Nevertheless, for me, a haircut at a hairdresser has two big disadvantages: For a good result, the algorithm is simple: we go to the salon in the city center if the master did well and go to this master.
Kit: In https://jiji.com.gh/baby-care/cotton any case, he paid off with one haircut! This machine worked for a year and a half, first the switch burned out (it was excluded from the circuit), and then the motor burned out with smoke that filled the entire apartment ... - They dry badly ... But I did step on the rake again. Without a comb, it is impossible to make a haircut on your own, the comb costs almost the same as the whole machine ...
Disassembling: < br /> The knife can not
lubricate for some very short time ... This lot is no longer in the history, so I provide a link to a similar lot. The city is very expensive in terms of prices for services ... Impressions from the operation are only positive. A few years ago, my typewriter fell on the tile and the plastic part in the knife broke and the knife stopped holding.

No Comments

Post a Reply

error: Content is protected !!